Complete page of SZ_IO62 controller. In this page collected all information and upgrades from posts.
Updated: 25/08/2021
– Manual have mistakes in commands (on page is correct)
SZ_IO_62
It is a standalone switch that can connect to a wide range of appliances. It can turn on up to 8 devices at once by pushing one button. Same functionality is provided by RS-232 port from any compatible device. Can be integrated with other automation systems.
Features
- Supports remotely (RS-232) turning on or off added devices.
- Supports single, double click or toggle input.
- Supports turning on or off up to 8 separately connected devices.
- Easy configuration over RS-232.
- Easy to install, easy to operate and can be activated immediately.
Functions
- It allows users to assign all added devices to one or different inputs.
- Module allows users to use one device to trigger ON/OFF one or more devices. So you can connect two devices to separated channels and program them to one input.
Work modesClick - one click to turn on or off configured outputs
Double click - double click to turn on or off configured outputs
Toggle - if input is shorted, opened to ground then turn on or off configured outputs
RS-232 commands:
- same as click mode
- same as double click mode
- same as input is shorted to ground
- same as input is open state
Commandsconf - list all configured inputs
IXSY 12345678 - Input programming. Just type IXSY 12345678 where X is input number and Y is mode of usage (1 - Single click, 2 Double clicks, 3 - Toggle On/Off), numbers are output number to assign to input. Example: I1S1 00045000 - assigned 4 and 5 output to input 1 mode Single click. *Can't assign same outputs to different inputs.
If all is alright you will see reply "OK"
save - saves the config and reboots controller
inX_on - turn on input X (where X is input number), if all ok you will see reply sInX_on.
inX_off - turn off input X (where X is input number), if all ok you will see reply sInX_off.
inX_s - turn on/off single click input X (where X is input number), if all ok you will see reply sInX_s.
inX_d - turn on/off double click input X (where X is input number), if all ok you will see reply sInX_d.
D0S1 1 - will reset to default configuration.
save - saves the config and reboots controller
Connection scheme
SZ_IO62
Complete page of SZ_IO62 controller. In this page collected all information and upgrades from posts.
Updated: 25/08/2021
– Manual have mistakes in commands (on page is correct)
Features - Supports remotely (RS-232) turning on or off added devices. - Supports single, double click or toggle input. - Supports turning on or off up to 8 separately connected devices. - Easy configuration over RS-232. - Easy to install, easy to operate and can be activated immediately. Functions - It allows users to assign all added devices to one or different inputs. - Module allows users to use one device to trigger ON/OFF one or more devices. So you can connect two devices to separated channels and program them to one input. Work modes Click - one click to turn on or off configured outputs Double click - double click to turn on or off configured outputs Toggle - if input is shorted, opened to ground then turn on or off configured outputs RS-232 commands: - same as click mode - same as double click mode - same as input is shorted to ground - same as input is open state Commands conf - list all configured inputs IXSY 12345678 - Input programming. Just type IXSY 12345678 where X is input number and Y is mode of usage (1 - Single click, 2 Double clicks, 3 - Toggle On/Off), numbers are output number to assign to input. Example: I1S1 00045000 - assigned 4 and 5 output to input 1 mode Single click. *Can't assign same outputs to different inputs. If all is alright you will see reply "OK" save - saves the config and reboots controller inX_on - turn on input X (where X is input number), if all ok you will see reply sInX_on. inX_off - turn off input X (where X is input number), if all ok you will see reply sInX_off. inX_s - turn on/off single click input X (where X is input number), if all ok you will see reply sInX_s. inX_d - turn on/off double click input X (where X is input number), if all ok you will see reply sInX_d. D0S1 1 - will reset to default configuration. save - saves the config and reboots controller Connection scheme